Difference between revisions of "Lookbook boot log"

From Felixl.com
Jump to navigationJump to search
 
Line 1: Line 1:
−
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2011.01.15 14:05:40 =~=~=~=~=~=~=~=~=~=~=~=
+
Boot with zImage
  
  
−
��� 4 ��� 3 ��� 2 ��� 1 ��� 0
+
Starting kernel ...
  
−
Boot with zImage
 
  
 +
Uncompressing  Linux................................................................................................ done, booting the kernel.
 +
cannot open /dev/null
 +
blkid: /dev/.tmp-block-7:3: No such file or directory
 +
blkid: /dev/.tmp-block-7:2: No such file or directory
 +
blkid: /dev/.tmp-block-7:4: No such file or directory
 +
blkid: /dev/.tmp-block-7:4: No such file or directory
 +
blkid: /dev/.tmp-block-7:7: No such file or directory
 +
blkid: /dev/.tmp-block-7:5: No such file or directory
 +
blkid: /dev/.tmp-block-7:4: No such file or directory
 +
/sbin/modprobe: invalid option -- 'b'
 +
/sbin/modprobe: invalid option -- 'b'
 +
blkid: /dev/.tmp-block-7:6: No such file or directory
 +
blkid: /dev/.tmp-block-7:6: No such file or directory
 +
blkid: /dev/.tmp-block-7:6: No such file or directory
 +
blkid: /dev/.tmp-block-7:6: No such file or directory
 +
blkid: /dev/.tmp-block-7:6: No such file or directory
 +
blkid: /dev/.tmp-block-7:6: No such file or directory
 +
blkid: /dev/.tmp-block-7:6: No such file or directory
 +
blkid: /dev/.tmp-block-7:6: No such file or directory
 +
blkid: /dev/.tmp-block-7:6: No such file or directory
 +
BusyBox v1.17.1 (2010-09-27 20:32:04 EDT) multi-call binary.
  
−
Starting kernel ...
+
Usage: modprobe [-qfwrsv] MODULE [symbol=value]...
  
−
 
+
Options:
−
Uncompressing Linux................................................................................................ done, booting the kernel.
 
−
cannot open /dev/null
 
−
blkid: /dev/.tmp-block-7:3: No such file or directory
 
−
blkid: /dev/.tmp-block-7:2: No such file or directory
 
−
blkid: /dev/.tmp-block-7:4: No such file or directory
 
−
blkid: /dev/.tmp-block-7:4: No such file or directory
 
−
blkid: /dev/.tmp-block-7:7: No such file or directory
 
−
blkid: /dev/.tmp-block-7:5: No such file or directory
 
−
blkid: /dev/.tmp-block-7:4: No such file or directory
 
−
/sbin/modprobe: invalid option -- 'b'
 
−
/sbin/modprobe: invalid option -- 'b'
 
−
blkid: /dev/.tmp-block-7:6: No such file or directory
 
−
blkid: /dev/.tmp-block-7:6: No such file or directory
 
−
blkid: /dev/.tmp-block-7:6: No such file or directory
 
−
blkid: /dev/.tmp-block-7:6: No such file or directory
 
−
blkid: /dev/.tmp-block-7:6: No such file or directory
 
−
blkid: /dev/.tmp-block-7:6: No such file or directory
 
−
blkid: /dev/.tmp-block-7:6: No such file or directory
 
−
blkid: /dev/.tmp-block-7:6: No such file or directory
 
−
blkid: /dev/.tmp-block-7:6: No such file or directory
 
−
BusyBox v1.17.1 (2010-09-27 20:32:04 EDT) multi-call binary.
 
−
 
 
−
Usage: modprobe [-qfwrsv] MODULE [symbol=value]...
 
−
 
 
−
Options:
 
 
-r Remove MODULE (stacks) or do autoclean
 
-r Remove MODULE (stacks) or do autoclean
 
-q Quiet
 
-q Quiet
Line 42: Line 37:
 
-s Report via syslog instead of stderr
 
-s Report via syslog instead of stderr
  
−
BusyBox v1.17.1 (2010-09-27 20:32:04 EDT) multi-call binary.
+
BusyBox v1.17.1 (2010-09-27 20:32:04 EDT) multi-call binary.
  
−
Usage: modprobe [-qfwrsv] MODULE [symbol=value]...
+
Usage: modprobe [-qfwrsv] MODULE [symbol=value]...
  
−
Options:
+
Options:
 
-r Remove MODULE (stacks) or do autoclean
 
-r Remove MODULE (stacks) or do autoclean
 
-q Quiet
 
-q Quiet
Line 54: Line 49:
 
-s Report via syslog instead of stderr
 
-s Report via syslog instead of stderr
  
−
vm.min_free_kbytes = 8192
+
vm.min_free_kbytes = 8192
−
vm.overcommit_memory = 1
+
vm.overcommit_memory = 1
−
UBI device number 1, total 955 LEBs (246435840 bytes, 235.0 MiB), available 0 LEBs (0 bytes), LEB size 258048 bytes (252.0 KiB)
+
UBI device number 1, total 955 LEBs (246435840 bytes, 235.0 MiB), available 0 LEBs (0 bytes), LEB size 258048 bytes (252.0 KiB)
−
ubimkvol: error!: UBI device does not have free logical eraseblocks
+
ubimkvol: error!: UBI device does not have free logical eraseblocks
−
dosfsck 3.0.6, 04 Oct 2009, FAT32, LFN
+
dosfsck 3.0.6, 04 Oct 2009, FAT32, LFN
−
/mnt/user/library.iso: 150 files, 104351/431260 clusters
+
/mnt/user/library.iso: 150 files, 104351/431260 clusters
−
rm: can't remove '/mnt/onboard/fsck*': No such file or directory
+
rm: can't remove '/mnt/onboard/fsck*': No such file or directory
−
Object::connect: No such signal PowerManager::wakeupTimeElapsed()
+
Object::connect: No such signal PowerManager::wakeupTimeElapsed()
−
void WebSyncScheduler::scheduleTimer()  - No need to schedule a sync  
+
void WebSyncScheduler::scheduleTimer()  - No need to schedule a sync  
−
SELECTING ITEM  1  
+
SELECTING ITEM  1  
−
CHECKING DB VERSION FOR MIGRATION  
+
CHECKING DB VERSION FOR MIGRATION  
−
DESIRED VERSION:  11  
+
DESIRED VERSION:  11  
−
CURRENT VERSION:  11  
+
CURRENT VERSION:  11  
−
Writing `version` file for use by the desktop client  
+
Writing `version` file for use by the desktop client  
−
NavigationController::cancelSync()   
+
NavigationController::cancelSync()   
−
TITLE:  "Сладостный МИФ, или МИФтерия жизни"  
+
TITLE:  "MyBook"  
  
−
Please press Enter to activate this console. TITLE:  "Сладостный МИФ, или МИФтерия жизни"  
+
Please press Enter to activate this console. TITLE:  "MyBook"  
−
SELECTING ITEM  1  
+
SELECTING ITEM  1  
−
parse ("sd add /dev/mmcblk0p1")  
+
parse ("sd add /dev/mmcblk0p1")  
−
NavigationController::cancelSync()   
+
NavigationController::cancelSync()   
−
arglist:  ("/usr/local/Kobo/nickel")  
+
arglist:  ("/usr/local/Kobo/nickel")  
−
Object::disconnect: No such signal FileSystemSyncProvider::parseXML(QIODevice *, BaseResponseHandler *, QObject *)
+
Object::disconnect: No such signal FileSystemSyncProvider::parseXML(QIODevice *, BaseResponseHandler *, QObject *)
−
Object::connect: No such signal FileSystemSyncProvider::parseXML(QIODevice *, BaseResponseHandler *, QObject *)
+
Object::connect: No such signal FileSystemSyncProvider::parseXML(QIODevice *, BaseResponseHandler *, QObject *)
−
Object::disconnect: No such signal FileSystemSyncProvider::parseFile(QIODevice *, QObject *, QString&)
+
Object::disconnect: No such signal FileSystemSyncProvider::parseFile(QIODevice *, QObject *, QString&)
−
Object::connect: No such signal FileSystemSyncProvider::parseFile(QIODevice *, QObject *, QString&)
+
Object::connect: No such signal FileSystemSyncProvider::parseFile(QIODevice *, QObject *, QString&)
−
Object::disconnect: No such signal FileSystemSyncProvider::imageParsed(QString&, QString&, QByteArray&, QObject *)
+
Object::disconnect: No such signal FileSystemSyncProvider::imageParsed(QString&, QString&, QByteArray&, QObject *)
−
Object::connect: No such signal FileSystemSyncProvider::imageParsed(QString&, QString&, QByteArray&, QObject *)
+
Object::connect: No such signal FileSystemSyncProvider::imageParsed(QString&, QString&, QByteArray&, QObject *)
−
Object::disconnect: No such slot FileSystemSyncWorker::upgradeRecommended(SyncProvider *, const Configuration &)
+
Object::disconnect: No such slot FileSystemSyncWorker::upgradeRecommended(SyncProvider *, const Configuration &)
−
Object::connect: No such slot FileSystemSyncWorker::upgradeRecommended(SyncProvider *, const Configuration &)
+
Object::connect: No such slot FileSystemSyncWorker::upgradeRecommended(SyncProvider *, const Configuration &)
−
Object::disconnect: No such slot FileSystemSyncWorker::upgradeRequired(SyncProvider *, const Configuration &)
+
Object::disconnect: No such slot FileSystemSyncWorker::upgradeRequired(SyncProvider *, const Configuration &)
−
Object::connect: No such slot FileSystemSyncWorker::upgradeRequired(SyncProvider *, const Configuration &)
+
Object::connect: No such slot FileSystemSyncWorker::upgradeRequired(SyncProvider *, const Configuration &)
−
Object::disconnect: No such slot FileSystemSyncWorker::upgradeForced(SyncProvider *, const Configuration &)
+
Object::disconnect: No such slot FileSystemSyncWorker::upgradeForced(SyncProvider *, const Configuration &)
−
Object::connect: No such slot FileSystemSyncWorker::upgradeForced(SyncProvider *, const Configuration &)
+
Object::connect: No such slot FileSystemSyncWorker::upgradeForced(SyncProvider *, const Configuration &)
−
Object::disconnect: No such slot FileSystemSyncWorker::downForMaintenance(const Configuration &)
+
Object::disconnect: No such slot FileSystemSyncWorker::downForMaintenance(const Configuration &)
−
Object::connect: No such slot FileSystemSyncWorker::downForMaintenance(const Configuration &)
+
Object::connect: No such slot FileSystemSyncWorker::downForMaintenance(const Configuration &)
−
Object::disconnect: No such slot FileSystemSyncWorker::applicationNotSupported(const Configuration &)
+
Object::disconnect: No such slot FileSystemSyncWorker::applicationNotSupported(const Configuration &)
−
Object::connect: No such slot FileSystemSyncWorker::applicationNotSupported(const Configuration &)
+
Object::connect: No such slot FileSystemSyncWorker::applicationNotSupported(const Configuration &)
 
  ------- FileSystemSyncProvider::start folder size = 1 ---------  
 
  ------- FileSystemSyncProvider::start folder size = 1 ---------  
−
QSqlDatabasePrivate::addDatabase: duplicate connection name 'readerDb', old connection removed.
+
QSqlDatabasePrivate::addDatabase: duplicate connection name 'readerDb', old connection removed.
−
CHECKING DB VERSION FOR MIGRATION  
+
CHECKING DB VERSION FOR MIGRATION  
−
DESIRED VERSION:  11  
+
DESIRED VERSION:  11  
−
CURRENT VERSION:  11  
+
CURRENT VERSION:  11  
−
Writing `version` file for use by the desktop client  
+
Writing `version` file for use by the desktop client  
−
NavigationController::cancelSync()   
+
NavigationController::cancelSync()   
−
TITLE:  "Сладостный МИФ, или МИФтерия жизни"  
+
TITLE:  "MyBook"  
−
TITLE:  "Сладостный МИФ, или МИФтерия жизни"  
+
TITLE:  "MyBook"  
−
TITLE:  "Сладостный МИФ, или МИФтерия жизни"  
+
TITLE:  "MyBook"  
−
SELECTING ITEM  1  
+
SELECTING ITEM  1  
  
−
/bin/sh: can't access tty; job control turned off
+
/bin/sh: can't access tty; job control turned off
−
~ # j��[Juname -a
+
~ # uname -a
−
Linux (none) 2.6.24.2 #179 Mon Aug 23 00:44:42 CST 2010 armv6l GNU/Linux
+
Linux (none) 2.6.24.2 #179 Mon Aug 23 00:44:42 CST 2010 armv6l GNU/Linux
−
~ # cat /proc/cpu�
+
~ # cat /proc/cpu�[Jinfo
−
~ # cat /proc/cpu�[Jinfo
+
Processor : ARMv6-compatible processor rev 6 (v6l)
−
Processor : ARMv6-compatible processor rev 6 (v6l)
+
BogoMIPS : 665.19
−
BogoMIPS : 665.19
+
Features : swp half thumb fastmult vfp edsp java  
−
Features : swp half thumb fastmult vfp edsp java  
+
CPU implementer : 0x41
−
CPU implementer : 0x41
+
CPU architecture: 7
−
CPU architecture: 7
+
CPU variant : 0x0
−
CPU variant : 0x0
+
CPU part : 0xb76
−
CPU part : 0xb76
+
CPU revision : 6
−
CPU revision : 6
+
Cache type : write-back
−
Cache type : write-back
+
Cache clean : cp15 c7 ops
−
Cache clean : cp15 c7 ops
+
Cache lockdown : format C
−
Cache lockdown : format C
+
Cache format : Harvard
−
Cache format : Harvard
+
I size : 16384
−
I size : 16384
+
I assoc : 4
−
I assoc : 4
+
I line length : 32
−
I line length : 32
+
I sets : 128
−
I sets : 128
+
D size : 16384
−
D size : 16384
+
D assoc : 4
−
D assoc : 4
+
D line length : 32
−
D line length : 32
+
D sets : 128
−
D sets : 128
 
  
−
Hardware : SMDK6410
+
Hardware : SMDK6410
−
Revision : 0000
+
Revision : 0000
−
Serial : 0000000000000000
+
Serial : 0000000000000000
−
~ # dmesg
+
~ # dmesg
−
Linux version 2.6.24.2 (root@ligang-laptop) (gcc version 4.1.2) #179 Mon Aug 23 00:44:42 CST 2010
+
Linux version 2.6.24.2 (root@ligang-laptop) (gcc version 4.1.2) #179 Mon Aug 23 00:44:42 CST 2010
−
CPU: ARMv6-compatible processor [410fb766] revision 6 (ARMv7), cr=00c5387f
+
CPU: ARMv6-compatible processor [410fb766] revision 6 (ARMv7), cr=00c5387f
−
Machine: SMDK6410
+
Machine: SMDK6410
−
Ignoring unrecognised tag 0x00000000
+
Ignoring unrecognised tag 0x00000000
−
Memory policy: ECC disabled, Data cache writeback
+
Memory policy: ECC disabled, Data cache writeback
−
On node 0 totalpages: 16384
+
On node 0 totalpages: 16384
 
   DMA zone: 128 pages used for memmap
 
   DMA zone: 128 pages used for memmap
 
   DMA zone: 0 pages reserved
 
   DMA zone: 0 pages reserved
Line 145: Line 139:
 
   Normal zone: 0 pages used for memmap
 
   Normal zone: 0 pages used for memmap
 
   Movable zone: 0 pages used for memmap
 
   Movable zone: 0 pages used for memmap
−
CPU S3C6410 (id 0x36410101)
+
CPU S3C6410 (id 0x36410101)
−
S3C6410: core 666.000 MHz, memory 111.000 MHz, peripheral 55.500 MHz
+
S3C6410: core 666.000 MHz, memory 111.000 MHz, peripheral 55.500 MHz
−
S3C6410: EPLL 192.000 MHz
+
S3C6410: EPLL 192.000 MHz
−
S3C64XX Clocks, (c) 2007 Samssung Electronics
+
S3C64XX Clocks, (c) 2007 Samssung Electronics
−
CPU0: D VIPT write-back cache
+
CPU0: D VIPT write-back cache
−
CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
+
CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
−
CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
+
CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
−
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
+
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
−
Kernel command line: console=ttySAC0,115200 loglevel=0 ubi.mtd=3 root=ubi0:rootfs rootfstype=ubifs
+
Kernel command line: console=ttySAC0,115200 loglevel=0 ubi.mtd=3 root=ubi0:rootfs rootfstype=ubifs
−
Trying to install chained interrupt handler for IRQ0
+
Trying to install chained interrupt handler for IRQ0
−
Trying to install chained interrupt handler for IRQ1
+
Trying to install chained interrupt handler for IRQ1
−
Trying to install chained interrupt handler for IRQ32
+
Trying to install chained interrupt handler for IRQ32
−
Trying to install chained interrupt handler for IRQ33
+
Trying to install chained interrupt handler for IRQ33
−
PID hash table entries: 256 (order: 8, 1024 bytes)
+
PID hash table entries: 256 (order: 8, 1024 bytes)
−
timer tcon=00600900, tcnt 29b0, tcfg 00001919,00000040, usec 000077ee
+
timer tcon=00600900, tcnt 29b0, tcfg 00001919,00000040, usec 000077ee
−
Console: colour dummy device 80x30
+
Console: colour dummy device 80x30
−
console [ttySAC0] enabled
+
console [ttySAC0] enabled
−
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
+
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
−
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
+
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
−
Memory: 64MB = 64MB total
+
Memory: 64MB = 64MB total
−
Memory: 61732KB available (2744K code, 263K data, 104K init)
+
Memory: 61732KB available (2744K code, 263K data, 104K init)
−
Calibrating delay loop... 665.19 BogoMIPS (lpj=1662976)
+
Calibrating delay loop... 665.19 BogoMIPS (lpj=1662976)
−
Mount-cache hash table entries: 512
+
Mount-cache hash table entries: 512
−
CPU: Testing write buffer coherency: ok
+
CPU: Testing write buffer coherency: ok
−
net_namespace: 64 bytes
+
net_namespace: 64 bytes
−
NET: Registered protocol family 16
+
NET: Registered protocol family 16
−
================> wifi status change from 0 to 0
+
================> wifi status change from 0 to 0
−
S3C6410 Power Management, (c) 2008 Samsung Electronics
+
S3C6410 Power Management, (c) 2008 Samsung Electronics
−
s3c6410: Initialising architecture
+
s3c6410: Initialising architecture
−
S3C DMA-pl080 Controller Driver, (c) 2006-2007 Samsung Electronics
+
S3C DMA-pl080 Controller Driver, (c) 2006-2007 Samsung Electronics
−
Total 32 DMA channels will be initialized.
+
Total 32 DMA channels will be initialized.
−
SCSI subsystem initialized
+
SCSI subsystem initialized
−
usbcore: registered new interface driver usbfs
+
usbcore: registered new interface driver usbfs
−
usbcore: registered new interface driver hub
+
usbcore: registered new interface driver hub
−
usbcore: registered new device driver usb
+
usbcore: registered new device driver usb
−
NET: Registered protocol family 2
+
NET: Registered protocol family 2
−
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
+
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
−
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
+
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
−
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
+
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
−
TCP: Hash tables configured (established 2048 bind 2048)
+
TCP: Hash tables configured (established 2048 bind 2048)
−
TCP reno registered
+
TCP reno registered
−
NetWinder Floating Point Emulator V0.97 (double precision)
+
NetWinder Floating Point Emulator V0.97 (double precision)
−
io scheduler noop registered
+
io scheduler noop registered
−
io scheduler anticipatory registered (default)
+
io scheduler anticipatory registered (default)
−
io scheduler deadline registered
+
io scheduler deadline registered
−
io scheduler cfq registered
+
io scheduler cfq registered
−
S3C_LCD clock got enabled :: 111.000 Mhz
+
S3C_LCD clock got enabled :: 111.000 Mhz
−
LCD TYPE :: LTE480WV will be initialized
+
LCD TYPE :: LTE480WV will be initialized
−
Window[0] - FB1: map_video_memory: clear ff200000:000bb800
+
Window[0] - FB1: map_video_memory: clear ff200000:000bb800
−
            FB1: map_video_memory: dma=53900000 cpu=ff200000 size=000bb800
+
            FB1: map_video_memory: dma=53900000 cpu=ff200000 size=000bb800
−
Console: switching to colour frame buffer device 100x30
+
Console: switching to colour frame buffer device 100x30
−
fb0: s3cfb frame buffer device
+
fb0: s3cfb frame buffer device
−
s3c_lcd_set_power:1  
+
s3c_lcd_set_power:1  
−
PWM channel 1 set g_tcnt = 1000, g_tcmp = 480  
+
PWM channel 1 set g_tcnt = 1000, g_tcmp = 480  
−
S3C ADC driver, (c) 2007 Samsung Electronics
+
S3C ADC driver, (c) 2007 Samsung Electronics
−
S3C ADC driver successfully probed !
+
S3C ADC driver successfully probed !
−
s3c-uart.0: s3c_serial0 at MMIO 0x7f005000 (irq = 37) is a S3C
+
s3c-uart.0: s3c_serial0 at MMIO 0x7f005000 (irq = 37) is a S3C
−
s3c-uart.1: s3c_serial1 at MMIO 0x7f005400 (irq = 38) is a S3C
+
s3c-uart.1: s3c_serial1 at MMIO 0x7f005400 (irq = 38) is a S3C
−
s3c-uart.2: s3c_serial2 at MMIO 0x7f005800 (irq = 39) is a S3C
+
s3c-uart.2: s3c_serial2 at MMIO 0x7f005800 (irq = 39) is a S3C
−
s3c-uart.3: s3c_serial3 at MMIO 0x7f005c00 (irq = 40) is a S3C
+
s3c-uart.3: s3c_serial3 at MMIO 0x7f005c00 (irq = 40) is a S3C
−
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
+
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
−
loop: module loaded
+
loop: module loaded
−
Driver 'sd' needs updating - please use bus_type methods
+
Driver 'sd' needs updating - please use bus_type methods
−
S3C NAND Driver, (c) 2007 Samsung Electronics
+
S3C NAND Driver, (c) 2007 Samsung Electronics
−
S3C NAND Driver is using hardware ECC.
+
S3C NAND Driver is using hardware ECC.
−
NAND device: Manufacturer ID: 0xec, Chip ID: 0xdc (Samsung NAND 512MiB 3,3V 8-bit)
+
NAND device: Manufacturer ID: 0xec, Chip ID: 0xdc (Samsung NAND 512MiB 3,3V 8-bit)
−
Creating 5 MTD partitions on "NAND 512MiB 3,3V 8-bit":
+
Creating 5 MTD partitions on "NAND 512MiB 3,3V 8-bit":
−
0x00000000-0x00040000 : "Bootloader"
+
0x00000000-0x00040000 : "Bootloader"
−
0x00040000-0x00340000 : "Kernel"
+
0x00040000-0x00340000 : "Kernel"
−
0x00340000-0x00d40000 : "resource"
+
0x00340000-0x00d40000 : "resource"
−
0x00d40000-0x11140000 : "File System 1"
+
0x00d40000-0x11140000 : "File System 1"
−
0x11140000-0x20000000 : "User space"
+
0x11140000-0x20000000 : "User space"
−
UBI: attaching mtd3 to ubi0
+
UBI: attaching mtd3 to ubi0
−
UBI: physical eraseblock size:  262144 bytes (256 KiB)
+
UBI: physical eraseblock size:  262144 bytes (256 KiB)
−
UBI: logical eraseblock size:    258048 bytes
+
UBI: logical eraseblock size:    258048 bytes
−
UBI: smallest flash I/O unit:    2048
+
UBI: smallest flash I/O unit:    2048
−
UBI: VID header offset:          2048 (aligned 2048)
+
UBI: VID header offset:          2048 (aligned 2048)
−
UBI: data offset:                4096
+
UBI: data offset:                4096
−
UBI: attached mtd3 to ubi0
+
UBI: attached mtd3 to ubi0
−
UBI: MTD device name:            "File System 1"
+
UBI: MTD device name:            "File System 1"
−
UBI: MTD device size:            260 MiB
+
UBI: MTD device size:            260 MiB
−
UBI: number of good PEBs:        1040
+
UBI: number of good PEBs:        1040
−
UBI: number of bad PEBs:        0
+
UBI: number of bad PEBs:        0
−
UBI: max. allowed volumes:      128
+
UBI: max. allowed volumes:      128
−
UBI: wear-leveling threshold:    4096
+
UBI: wear-leveling threshold:    4096
−
UBI: number of internal volumes: 1
+
UBI: number of internal volumes: 1
−
UBI: number of user volumes:    1
+
UBI: number of user volumes:    1
−
UBI: available PEBs:            0
+
UBI: available PEBs:            0
−
UBI: total number of reserved PEBs: 1040
+
UBI: total number of reserved PEBs: 1040
−
UBI: number of PEBs reserved for bad PEB handling: 10
+
UBI: number of PEBs reserved for bad PEB handling: 10
−
UBI: max/mean erase counter: 1/0
+
UBI: max/mean erase counter: 1/0
−
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
+
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
−
UBI: background thread "ubi_bgt0d" started, PID 220
+
UBI: background thread "ubi_bgt0d" started, PID 220
−
usb_host_clk_en  
+
usb_host_clk_en  
 +
otg_phy_init ...................!
 +
s3c2410-ohci s3c2410-ohci: S3C OHCI
 +
s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1
 +
s3c2410-ohci s3c2410-ohci: irq 47, io mem 0x74300000
 +
usb usb1: configuration #1 chosen from 1 choice
 +
hub 1-0:1.0: USB hub found
 +
hub 1-0:1.0: 1 port detected
 +
s3c6410_OTGHCD s3c6410_OTGHCD: S3C6410 OTGHCD
 +
s3c6410_OTGHCD s3c6410_OTGHCD: new USB bus registered, assigned bus number 2
 +
s3c6410_OTGHCD s3c6410_OTGHCD: irq 58, io mem 0x7c000000
 +
===============Enter ID_DEVICE  Mod===============
 +
===============Enter ID_DEVICE  Mod===============
 +
usb usb2: configuration #1 chosen from 1 choice
 +
hub 2-0:1.0: USB hub found
 +
hub 2-0:1.0: 1 port detected
 +
otg_phy_init ...................!
 +
===============Enter ID_DEVICE  Mod===============
 +
===============Enter ID_DEVICE  Mod===============
 
  otg_phy_init ...................!
 
  otg_phy_init ...................!
−
s3c2410-ohci s3c2410-ohci: S3C OHCI
+
  Loaded s3c-udc version Aug 23 2010 (DMA Mode)
−
s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1
+
input: midfun-keys as /devices/platform/midfun-keys/input/input0
−
s3c2410-ohci s3c2410-ohci: irq 47, io mem 0x74300000
+
input: s3c-keypad as /devices/platform/s3c-keypad/input/input1
−
usb usb1: configuration #1 chosen from 1 choice
+
s3c-keypad Initialized
−
hub 1-0:1.0: USB hub found
+
S3C Keypad Driver
−
hub 1-0:1.0: 1 port detected
+
S3C24XX RTC, (c) 2004,2006 Simtec Electronics
−
s3c6410_OTGHCD s3c6410_OTGHCD: S3C6410 OTGHCD
+
s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling
−
s3c6410_OTGHCD s3c6410_OTGHCD: new USB bus registered, assigned bus number 2
+
s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0
−
s3c6410_OTGHCD s3c6410_OTGHCD: irq 58, io mem 0x7c000000
+
S3C PWM Driver, (c) 2006-2007 Samsung Electronics
−
===============Enter ID_DEVICE  Mod===============
+
s3c-hsmmc: card inserted.
−
===============Enter ID_DEVICE  Mod===============
+
[s3c_hsmmc_probe]: s3c-hsmmc.1: at 0xc5000000 with irq 57. clk src: sclk_DOUTmpll_mmc1
−
usb usb2: configuration #1 chosen from 1 choice
+
TCP cubic registered
−
hub 2-0:1.0: USB hub found
+
NET: Registered protocol family 1
−
hub 2-0:1.0: 1 port detected
+
NET: Registered protocol family 17
−
otg_phy_init ...................!
+
NET: Registered protocol family 15
−
===============Enter ID_DEVICE Mod===============
+
ieee80211: 802.11 data/management/control stack, git-1.1.13
−
===============Enter ID_DEVICE  Mod===============
+
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
−
otg_phy_init ...................!
+
ieee80211_crypt: registered algorithm 'NULL'
−
Loaded s3c-udc version Aug 23 2010 (DMA Mode)
+
ieee80211_crypt: registered algorithm 'WEP'
−
input: midfun-keys as /devices/platform/midfun-keys/input/input0
+
ieee80211_crypt: registered algorithm 'CCMP'
−
input: s3c-keypad as /devices/platform/s3c-keypad/input/input1
+
ieee80211_crypt: registered algorithm 'TKIP'
−
s3c-keypad Initialized
+
VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
−
S3C Keypad Driver
+
s3c2410-rtc s3c2410-rtc: setting system clock to 2011-01-15 22:05:53 UTC (1295129153)
−
S3C24XX RTC, (c) 2004,2006 Simtec Electronics
+
UBIFS: recovery needed
−
s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling
+
UBIFS: recovery completed
−
s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0
+
UBIFS: mounted UBI device 0, volume 0, name "rootfs"
−
S3C PWM Driver, (c) 2006-2007 Samsung Electronics
+
UBIFS: file system size:  262434816 bytes (256284 KiB, 250 MiB, 1017 LEBs)
−
s3c-hsmmc: card inserted.
+
UBIFS: journal size:      13160448 bytes (12852 KiB, 12 MiB, 51 LEBs)
−
[s3c_hsmmc_probe]: s3c-hsmmc.1: at 0xc5000000 with irq 57. clk src: sclk_DOUTmpll_mmc1
+
UBIFS: media format:      w4/r0 (latest is w4/r0)
−
TCP cubic registered
+
UBIFS: default compressor: lzo
−
NET: Registered protocol family 1
+
UBIFS: reserved for root:  4952683 bytes (4836 KiB)
−
NET: Registered protocol family 17
+
VFS: Mounted root (ubifs filesystem).
−
NET: Registered protocol family 15
+
Freeing init memory: 104K
−
ieee80211: 802.11 data/management/control stack, git-1.1.13
+
mmc0: host does not support reading read-only switch. assuming write-enable.
−
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
+
mmc0: new SD card at address e624
−
ieee80211_crypt: registered algorithm 'NULL'
+
mmcblk0: mmc0:e624 SD02G 1985024KiB  
−
ieee80211_crypt: registered algorithm 'WEP'
+
  mmcblk0: p1
−
ieee80211_crypt: registered algorithm 'CCMP'
+
UBI: attaching mtd4 to ubi1
−
ieee80211_crypt: registered algorithm 'TKIP'
+
UBI: physical eraseblock size:  262144 bytes (256 KiB)
−
VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
+
UBI: logical eraseblock size:    258048 bytes
−
s3c2410-rtc s3c2410-rtc: setting system clock to 2011-01-15 22:05:53 UTC (1295129153)
+
UBI: smallest flash I/O unit:    2048
−
UBIFS: recovery needed
+
UBI: VID header offset:          2048 (aligned 2048)
−
UBIFS: recovery completed
+
UBI: data offset:                4096
−
UBIFS: mounted UBI device 0, volume 0, name "rootfs"
+
UBI: attached mtd4 to ubi1
−
UBIFS: file system size:  262434816 bytes (256284 KiB, 250 MiB, 1017 LEBs)
+
UBI: MTD device name:            "User space"
−
UBIFS: journal size:      13160448 bytes (12852 KiB, 12 MiB, 51 LEBs)
+
UBI: MTD device size:            238 MiB
−
UBIFS: media format:      w4/r0 (latest is w4/r0)
+
UBI: number of good PEBs:        955
−
UBIFS: default compressor: lzo
+
UBI: number of bad PEBs:        0
−
UBIFS: reserved for root:  4952683 bytes (4836 KiB)
+
UBI: max. allowed volumes:      128
−
VFS: Mounted root (ubifs filesystem).
+
UBI: wear-leveling threshold:    4096
−
Freeing init memory: 104K
+
UBI: number of internal volumes: 1
−
mmc0: host does not support reading read-only switch. assuming write-enable.
+
UBI: number of user volumes:    1
−
mmc0: new SD card at address e624
+
UBI: available PEBs:            0
−
mmcblk0: mmc0:e624 SD02G 1985024KiB  
+
UBI: total number of reserved PEBs: 955
−
mmcblk0: p1
+
UBI: number of PEBs reserved for bad PEB handling: 9
−
UBI: attaching mtd4 to ubi1
+
UBI: max/mean erase counter: 1/0
−
UBI: physical eraseblock size:  262144 bytes (256 KiB)
+
UBI: background thread "ubi_bgt1d" started, PID 484
−
UBI: logical eraseblock size:    258048 bytes
+
UBIFS: recovery needed
−
UBI: smallest flash I/O unit:    2048
+
UBIFS: recovery completed
−
UBI: VID header offset:          2048 (aligned 2048)
+
UBIFS: mounted UBI device 1, volume 0, name "ubifs1"
−
UBI: data offset:                4096
+
UBIFS: file system size:  240758784 bytes (235116 KiB, 229 MiB, 933 LEBs)
−
UBI: attached mtd4 to ubi1
+
UBIFS: journal size:      12128256 bytes (11844 KiB, 11 MiB, 47 LEBs)
−
UBI: MTD device name:            "User space"
+
UBIFS: media format:      w4/r0 (latest is w4/r0)
−
UBI: MTD device size:            238 MiB
+
UBIFS: default compressor: lzo
−
UBI: number of good PEBs:        955
+
UBIFS: reserved for root:  4952683 bytes (4836 KiB)
−
UBI: number of bad PEBs:        0
+
usbcore: registered new interface driver usbhid
−
UBI: max. allowed volumes:      128
+
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
−
UBI: wear-leveling threshold:    4096
+
Adding 64492k swap on /mnt/swap/actual_swap.  Priority:-1 extents:1 across:64492k
−
UBI: number of internal volumes: 1
+
usb 1-1: new full speed USB device using s3c2410-ohci and address 2
−
UBI: number of user volumes:    1
+
usb 1-1: not running at top speed; connect to a high speed hub
−
UBI: available PEBs:            0
+
usb 1-1: configuration #1 chosen from 1 choice
−
UBI: total number of reserved PEBs: 955
+
================> wifi status change from 0 to 1
−
UBI: number of PEBs reserved for bad PEB handling: 9
+
rtusb init --->  
−
UBI: max/mean erase counter: 1/0
 
−
UBI: background thread "ubi_bgt1d" started, PID 484
 
−
UBIFS: recovery needed
 
−
UBIFS: recovery completed
 
−
UBIFS: mounted UBI device 1, volume 0, name "ubifs1"
 
−
UBIFS: file system size:  240758784 bytes (235116 KiB, 229 MiB, 933 LEBs)
 
−
UBIFS: journal size:      12128256 bytes (11844 KiB, 11 MiB, 47 LEBs)
 
−
UBIFS: media format:      w4/r0 (latest is w4/r0)
 
−
UBIFS: default compressor: lzo
 
−
UBIFS: reserved for root:  4952683 bytes (4836 KiB)
 
−
usbcore: registered new interface driver usbhid
 
−
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
 
−
Adding 64492k swap on /mnt/swap/actual_swap.  Priority:-1 extents:1 across:64492k
 
−
usb 1-1: new full speed USB device using s3c2410-ohci and address 2
 
−
usb 1-1: not running at top speed; connect to a high speed hub
 
−
usb 1-1: configuration #1 chosen from 1 choice
 
−
================> wifi status change from 0 to 1
 
−
rtusb init --->
 
  
  
−
=== pAd = c4f01000, size = 439728 ===
+
=== pAd = c4f01000, size = 439728 ===
  
 
  RTMPAllocAdapterBlock, Status=0
 
  RTMPAllocAdapterBlock, Status=0
−
usbcore: registered new interface driver rt2870
+
usbcore: registered new interface driver rt2870
 
  RTMPAllocTxRxRingMemory, Status=0
 
  RTMPAllocTxRxRingMemory, Status=0
−
-->RTUSBVenderReset
+
-->RTUSBVenderReset
−
RTUSBVenderReset
+
RTUSBVenderReset
−
Key1Str is Invalid key length(0) or Type(0)
+
Key1Str is Invalid key length(0) or Type(0)
−
Key2Str is Invalid key length(0) or Type(0)
+
Key2Str is Invalid key length(0) or Type(0)
−
Key3Str is Invalid key length(0) or Type(0)
+
Key3Str is Invalid key length(0) or Type(0)
−
Key4Str is Invalid key length(0) or Type(0)
+
Key4Str is Invalid key length(0) or Type(0)
−
1. Phy Mode = 0
+
1. Phy Mode = 0
−
2. Phy Mode = 0
+
2. Phy Mode = 0
−
NVM is Efuse and its size =2d[2d0-2fc]  
+
NVM is Efuse and its size =2d[2d0-2fc]  
−
3. Phy Mode = 0
+
3. Phy Mode = 0
−
RTMPSetPhyMode: channel is out of range, use first channel=1  
+
RTMPSetPhyMode: channel is out of range, use first channel=1  
−
== rt28xx_init, Status=0
+
== rt28xx_init, Status=0
−
0x1300 = 00073200
+
0x1300 = 00073200
−
s3c_lcd_set_power:1  
+
s3c_lcd_set_power:1  
−
PWM channel 1 set g_tcnt = 1000, g_tcmp = 912  
+
PWM channel 1 set g_tcnt = 1000, g_tcmp = 912  
−
Terminate the task(RtmpMlmeTask) with pid(543)!
+
Terminate the task(RtmpMlmeTask) with pid(543)!
−
Terminate the task(RtmpCmdQTask) with pid(544)!
+
Terminate the task(RtmpCmdQTask) with pid(544)!
−
Terminate the task(RtmpTimerTask) with pid(542)!
+
Terminate the task(RtmpTimerTask) with pid(542)!
−
---> RTMPFreeTxRxRingMemory
+
---> RTMPFreeTxRxRingMemory
−
- RTMPFreeTxRxRingMemory
+
- RTMPFreeTxRxRingMemory
−
================> wifi status change from 1 to 0
+
================> wifi status change from 1 to 0
−
usb 1-1: USB disconnect, address 2
+
usb 1-1: USB disconnect, address 2
−
rtusb_disconnect: unregister usbnet usb-s3c24xx-1
+
rtusb_disconnect: unregister usbnet usb-s3c24xx-1
−
RtmpOSNetDevDetach(): RtmpOSNetDeviceDetach(), dev->name=ra0!
+
RtmpOSNetDevDetach(): RtmpOSNetDeviceDetach(), dev->name=ra0!
−
RTUSB disconnect successfully
+
  RTUSB disconnect successfully
−
~ #
+
~ #

Revision as of 15:50, 15 January 2011

Boot with zImage



Starting kernel ...



Uncompressing   Linux................................................................................................ done, booting the kernel.
cannot open /dev/null
blkid: /dev/.tmp-block-7:3: No such file or directory
blkid: /dev/.tmp-block-7:2: No such file or directory
blkid: /dev/.tmp-block-7:4: No such file or directory
blkid: /dev/.tmp-block-7:4: No such file or directory
blkid: /dev/.tmp-block-7:7: No such file or directory
blkid: /dev/.tmp-block-7:5: No such file or directory
blkid: /dev/.tmp-block-7:4: No such file or directory
/sbin/modprobe: invalid option -- 'b'
/sbin/modprobe: invalid option -- 'b'
blkid: /dev/.tmp-block-7:6: No such file or directory
blkid: /dev/.tmp-block-7:6: No such file or directory
blkid: /dev/.tmp-block-7:6: No such file or directory
blkid: /dev/.tmp-block-7:6: No such file or directory
blkid: /dev/.tmp-block-7:6: No such file or directory
blkid: /dev/.tmp-block-7:6: No such file or directory
blkid: /dev/.tmp-block-7:6: No such file or directory
blkid: /dev/.tmp-block-7:6: No such file or directory
blkid: /dev/.tmp-block-7:6: No such file or directory
BusyBox v1.17.1 (2010-09-27 20:32:04 EDT) multi-call binary. 

Usage: modprobe [-qfwrsv] MODULE [symbol=value]...

Options:

-r Remove MODULE (stacks) or do autoclean -q Quiet -v Verbose -f Force -w Wait for unload -s Report via syslog instead of stderr 

BusyBox v1.17.1 (2010-09-27 20:32:04 EDT) multi-call binary.

Usage: modprobe [-qfwrsv] MODULE [symbol=value]...

Options:

-r Remove MODULE (stacks) or do autoclean -q Quiet -v Verbose -f Force -w Wait for unload -s Report via syslog instead of stderr 

vm.min_free_kbytes = 8192
vm.overcommit_memory = 1
UBI device number 1, total 955 LEBs (246435840 bytes, 235.0 MiB), available 0 LEBs (0 bytes), LEB  size 258048 bytes (252.0 KiB)
ubimkvol: error!: UBI device does not have free logical eraseblocks
dosfsck 3.0.6, 04 Oct 2009, FAT32, LFN
/mnt/user/library.iso: 150 files, 104351/431260 clusters
rm: can't remove '/mnt/onboard/fsck*': No such file or directory
Object::connect: No such signal PowerManager::wakeupTimeElapsed()
void WebSyncScheduler::scheduleTimer()  - No need to schedule a sync 
SELECTING ITEM  1 
CHECKING DB VERSION FOR MIGRATION 
DESIRED VERSION:  11 
CURRENT VERSION:  11 
Writing `version` file for use by the desktop client 
NavigationController::cancelSync()  
TITLE:  "MyBook" 

Please press Enter to activate this console. TITLE:  "MyBook" 
SELECTING ITEM  1 
parse ("sd add /dev/mmcblk0p1") 
NavigationController::cancelSync()  
arglist:  ("/usr/local/Kobo/nickel") 
Object::disconnect: No such signal FileSystemSyncProvider::parseXML(QIODevice *, BaseResponseHandler *, QObject *)
Object::connect: No such signal FileSystemSyncProvider::parseXML(QIODevice *, BaseResponseHandler  *, QObject *)
Object::disconnect: No such signal FileSystemSyncProvider::parseFile(QIODevice *, QObject *,  QString&)
Object::connect: No such signal FileSystemSyncProvider::parseFile(QIODevice *, QObject *, QString&)
Object::disconnect: No such signal FileSystemSyncProvider::imageParsed(QString&, QString&,  QByteArray&, QObject *)
Object::connect: No such signal FileSystemSyncProvider::imageParsed(QString&, QString&, QByteArray&, QObject *)
Object::disconnect: No such slot FileSystemSyncWorker::upgradeRecommended(SyncProvider *, const Configuration &)
Object::connect: No such slot FileSystemSyncWorker::upgradeRecommended(SyncProvider *, const Configuration &)
Object::disconnect: No such slot FileSystemSyncWorker::upgradeRequired(SyncProvider *, const Configuration &)
Object::connect: No such slot FileSystemSyncWorker::upgradeRequired(SyncProvider *, const Configuration &)
Object::disconnect: No such slot FileSystemSyncWorker::upgradeForced(SyncProvider *, const Configuration &)
Object::connect: No such slot FileSystemSyncWorker::upgradeForced(SyncProvider *, const Configuration &)
Object::disconnect: No such slot FileSystemSyncWorker::downForMaintenance(const Configuration &)
Object::connect: No such slot FileSystemSyncWorker::downForMaintenance(const Configuration &)
Object::disconnect: No such slot FileSystemSyncWorker::applicationNotSupported(const Configuration &)
Object::connect: No such slot FileSystemSyncWorker::applicationNotSupported(const Configuration &)
------- FileSystemSyncProvider::start folder size = 1 --------- 
QSqlDatabasePrivate::addDatabase: duplicate connection name 'readerDb', old connection removed.
CHECKING DB VERSION FOR MIGRATION 
DESIRED VERSION:  11 
CURRENT VERSION:  11 
Writing `version` file for use by the desktop client 
NavigationController::cancelSync()  
TITLE:  "MyBook" 
TITLE:  "MyBook" 
TITLE:  "MyBook" 
SELECTING ITEM  1 

/bin/sh: can't access tty; job control turned off
~ # uname -a
Linux (none) 2.6.24.2 #179 Mon Aug 23 00:44:42 CST 2010 armv6l GNU/Linux
~ # cat /proc/cpu�[Jinfo
Processor	: ARMv6-compatible processor rev 6 (v6l)
BogoMIPS	: 665.19
Features	: swp half thumb fastmult vfp edsp java 
CPU implementer	: 0x41
CPU architecture: 7
CPU variant	: 0x0
CPU part	: 0xb76
CPU revision	: 6
Cache type	: write-back
Cache clean	: cp15 c7 ops
Cache lockdown	: format C
Cache format	: Harvard
I size		: 16384
I assoc		: 4
I line length	: 32
I sets		: 128
D size		: 16384
D assoc		: 4
D line length	: 32
D sets		: 128

Hardware	: SMDK6410
Revision	: 0000
Serial		: 0000000000000000
~ # dmesg
Linux version 2.6.24.2 (root@ligang-laptop) (gcc version 4.1.2) #179 Mon Aug 23 00:44:42 CST 2010
CPU: ARMv6-compatible processor [410fb766] revision 6 (ARMv7), cr=00c5387f
Machine: SMDK6410
Ignoring unrecognised tag 0x00000000
Memory policy: ECC disabled, Data cache writeback
On node 0 totalpages: 16384
 DMA zone: 128 pages used for memmap
 DMA zone: 0 pages reserved
 DMA zone: 16256 pages, LIFO batch:3
 Normal zone: 0 pages used for memmap
 Movable zone: 0 pages used for memmap
CPU S3C6410 (id 0x36410101)
S3C6410: core 666.000 MHz, memory 111.000 MHz, peripheral 55.500 MHz
S3C6410: EPLL 192.000 MHz
S3C64XX Clocks, (c) 2007 Samssung Electronics
CPU0: D VIPT write-back cache
CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
Kernel command line: console=ttySAC0,115200 loglevel=0 ubi.mtd=3 root=ubi0:rootfs rootfstype=ubifs
Trying to install chained interrupt handler for IRQ0
Trying to install chained interrupt handler for IRQ1
Trying to install chained interrupt handler for IRQ32
Trying to install chained interrupt handler for IRQ33
PID hash table entries: 256 (order: 8, 1024 bytes)
timer tcon=00600900, tcnt 29b0, tcfg 00001919,00000040, usec 000077ee
Console: colour dummy device 80x30
console [ttySAC0] enabled
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 64MB = 64MB total
Memory: 61732KB available (2744K code, 263K data, 104K init)
Calibrating delay loop... 665.19 BogoMIPS (lpj=1662976)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
net_namespace: 64 bytes
NET: Registered protocol family 16
================> wifi status change from 0 to 0
S3C6410 Power Management, (c) 2008 Samsung Electronics
s3c6410: Initialising architecture
S3C DMA-pl080 Controller Driver, (c) 2006-2007 Samsung Electronics
Total 32 DMA channels will be initialized.
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
NetWinder Floating Point Emulator V0.97 (double precision)
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
S3C_LCD clock got enabled :: 111.000 Mhz
LCD TYPE :: LTE480WV will be initialized
Window[0] - FB1: map_video_memory: clear ff200000:000bb800
            FB1: map_video_memory: dma=53900000 cpu=ff200000 size=000bb800
Console: switching to colour frame buffer device 100x30
fb0: s3cfb frame buffer device
s3c_lcd_set_power:1 
PWM channel 1 set g_tcnt = 1000, g_tcmp = 480 
S3C ADC driver, (c) 2007 Samsung Electronics
S3C ADC driver successfully probed !
s3c-uart.0: s3c_serial0 at MMIO 0x7f005000 (irq = 37) is a S3C
s3c-uart.1: s3c_serial1 at MMIO 0x7f005400 (irq = 38) is a S3C
s3c-uart.2: s3c_serial2 at MMIO 0x7f005800 (irq = 39) is a S3C
s3c-uart.3: s3c_serial3 at MMIO 0x7f005c00 (irq = 40) is a S3C
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: module loaded
Driver 'sd' needs updating - please use bus_type methods
S3C NAND Driver, (c) 2007 Samsung Electronics
S3C NAND Driver is using hardware ECC.
NAND device: Manufacturer ID: 0xec, Chip ID: 0xdc (Samsung NAND 512MiB 3,3V 8-bit)
Creating 5 MTD partitions on "NAND 512MiB 3,3V 8-bit":
0x00000000-0x00040000 : "Bootloader"
0x00040000-0x00340000 : "Kernel"
0x00340000-0x00d40000 : "resource"
0x00d40000-0x11140000 : "File System 1"
0x11140000-0x20000000 : "User space"
UBI: attaching mtd3 to ubi0
UBI: physical eraseblock size:   262144 bytes (256 KiB)
UBI: logical eraseblock size:    258048 bytes
UBI: smallest flash I/O unit:    2048
UBI: VID header offset:          2048 (aligned 2048)
UBI: data offset:                4096
UBI: attached mtd3 to ubi0
UBI: MTD device name:            "File System 1"
UBI: MTD device size:            260 MiB
UBI: number of good PEBs:        1040
UBI: number of bad PEBs:         0
UBI: max. allowed volumes:       128
UBI: wear-leveling threshold:    4096
UBI: number of internal volumes: 1
UBI: number of user volumes:     1
UBI: available PEBs:             0
UBI: total number of reserved PEBs: 1040
UBI: number of PEBs reserved for bad PEB handling: 10
UBI: max/mean erase counter: 1/0
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
UBI: background thread "ubi_bgt0d" started, PID 220
usb_host_clk_en 
otg_phy_init ...................!
s3c2410-ohci s3c2410-ohci: S3C OHCI
s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1
s3c2410-ohci s3c2410-ohci: irq 47, io mem 0x74300000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
s3c6410_OTGHCD s3c6410_OTGHCD: S3C6410 OTGHCD
s3c6410_OTGHCD s3c6410_OTGHCD: new USB bus registered, assigned bus number 2
s3c6410_OTGHCD s3c6410_OTGHCD: irq 58, io mem 0x7c000000
===============Enter ID_DEVICE  Mod===============
===============Enter ID_DEVICE  Mod===============
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
otg_phy_init ...................!
===============Enter ID_DEVICE  Mod===============
===============Enter ID_DEVICE  Mod===============
otg_phy_init ...................!
Loaded s3c-udc version Aug 23 2010 (DMA Mode)
input: midfun-keys as /devices/platform/midfun-keys/input/input0
input: s3c-keypad as /devices/platform/s3c-keypad/input/input1
s3c-keypad Initialized
S3C Keypad Driver
S3C24XX RTC, (c) 2004,2006 Simtec Electronics
s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling
s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0
S3C PWM Driver, (c) 2006-2007 Samsung Electronics
s3c-hsmmc: card inserted.
[s3c_hsmmc_probe]: s3c-hsmmc.1: at 0xc5000000 with irq 57. clk src: sclk_DOUTmpll_mmc1
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
ieee80211_crypt: registered algorithm 'NULL'
ieee80211_crypt: registered algorithm 'WEP'
ieee80211_crypt: registered algorithm 'CCMP'
ieee80211_crypt: registered algorithm 'TKIP'
VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
s3c2410-rtc s3c2410-rtc: setting system clock to 2011-01-15 22:05:53 UTC (1295129153)
UBIFS: recovery needed
UBIFS: recovery completed
UBIFS: mounted UBI device 0, volume 0, name "rootfs"
UBIFS: file system size:   262434816 bytes (256284 KiB, 250 MiB, 1017 LEBs)
UBIFS: journal size:       13160448 bytes (12852 KiB, 12 MiB, 51 LEBs)
UBIFS: media format:       w4/r0 (latest is w4/r0)
UBIFS: default compressor: lzo
UBIFS: reserved for root:  4952683 bytes (4836 KiB)
VFS: Mounted root (ubifs filesystem).
Freeing init memory: 104K
mmc0: host does not support reading read-only switch. assuming write-enable.
mmc0: new SD card at address e624
mmcblk0: mmc0:e624 SD02G 1985024KiB 
 mmcblk0: p1
UBI: attaching mtd4 to ubi1
UBI: physical eraseblock size:   262144 bytes (256 KiB)
UBI: logical eraseblock size:    258048 bytes
UBI: smallest flash I/O unit:    2048
UBI: VID header offset:          2048 (aligned 2048)
UBI: data offset:                4096
UBI: attached mtd4 to ubi1
UBI: MTD device name:            "User space"
UBI: MTD device size:            238 MiB
UBI: number of good PEBs:        955
UBI: number of bad PEBs:         0
UBI: max. allowed volumes:       128
UBI: wear-leveling threshold:    4096
UBI: number of internal volumes: 1
UBI: number of user volumes:     1
UBI: available PEBs:             0
UBI: total number of reserved PEBs: 955
UBI: number of PEBs reserved for bad PEB handling: 9
UBI: max/mean erase counter: 1/0
UBI: background thread "ubi_bgt1d" started, PID 484
UBIFS: recovery needed
UBIFS: recovery completed
UBIFS: mounted UBI device 1, volume 0, name "ubifs1"
UBIFS: file system size:   240758784 bytes (235116 KiB, 229 MiB, 933 LEBs)
UBIFS: journal size:       12128256 bytes (11844 KiB, 11 MiB, 47 LEBs)
UBIFS: media format:       w4/r0 (latest is w4/r0)
UBIFS: default compressor: lzo
UBIFS: reserved for root:  4952683 bytes (4836 KiB)
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Adding 64492k swap on /mnt/swap/actual_swap.  Priority:-1 extents:1 across:64492k
usb 1-1: new full speed USB device using s3c2410-ohci and address 2
usb 1-1: not running at top speed; connect to a high speed hub
usb 1-1: configuration #1 chosen from 1 choice
================> wifi status change from 0 to 1
rtusb init ---> 



=== pAd = c4f01000, size = 439728 ===

RTMPAllocAdapterBlock, Status=0
usbcore: registered new interface driver rt2870
RTMPAllocTxRxRingMemory, Status=0
-->RTUSBVenderReset
RTUSBVenderReset
Key1Str is Invalid key length(0) or Type(0)
Key2Str is Invalid key length(0) or Type(0)
Key3Str is Invalid key length(0) or Type(0)
Key4Str is Invalid key length(0) or Type(0)
1. Phy Mode = 0
2. Phy Mode = 0
NVM is Efuse and its size =2d[2d0-2fc] 
3. Phy Mode = 0
RTMPSetPhyMode: channel is out of range, use first channel=1 
== rt28xx_init, Status=0
0x1300 = 00073200
s3c_lcd_set_power:1 
PWM channel 1 set g_tcnt = 1000, g_tcmp = 912 
Terminate the task(RtmpMlmeTask) with pid(543)!
Terminate the task(RtmpCmdQTask) with pid(544)!
Terminate the task(RtmpTimerTask) with pid(542)!
---> RTMPFreeTxRxRingMemory
- RTMPFreeTxRxRingMemory
================> wifi status change from 1 to 0
usb 1-1: USB disconnect, address 2
rtusb_disconnect: unregister usbnet usb-s3c24xx-1
RtmpOSNetDevDetach(): RtmpOSNetDeviceDetach(), dev->name=ra0!
 RTUSB disconnect successfully
~ #
Retrieved from "https://felixl.com/index.php?title=Lookbook_boot_log&oldid=1759"